PRINT
MERCURY SABLE
MODEL YEAR(S
SABLE 2003
KEY T-HARNESS IMMOBILIZER
FDKEY-6 N/A FORD'S SECURILOCK ANTI-THEFT TRANSPONDER SYSTEM, Requires 791 and Extra Ignition Key, See NOTE #4
PART COLOR LOCATION DIAGRAM
12 VOLT CONSTANT LIGHT GREEN/PURPLE (+) @ IGNITION SWITCH HARNESS
STARTER RED/LIGHT BLUE (+) @ IGNITION SWITCH HARNESS
STARTER 2 N/A
IGNITION 1 RED/LIGHT GREEN (+) @ IGNITION SWITCH HARNESS
IGNITION 2 BLACK/LIGHT GREEN (+) @ IGNITION SWITCH HARNESS
IGNITION 3 N/A
ACCESSORY/HEATER BLOWER 1 GRAY/YELLOW (+) @ IGNITION SWITCH HARNESS
ACCESSORY/HEATER BLOWER 2 N/A
KEYSENSE N/A
PARKING LIGHTS ( - ) N/A
PARKING LIGHTS ( + ) BROWN (+) @ HEADLIGHT SWITCH or FUSEBOX
POWER LOCK PINK/YELLOW (TYPE B) @ GEM, 26 Pin Plug, See NOTE *1
POWER UNLOCK PINK/LIGHT GREEN (TYPE B) @ GEM, 26 Pin Plug, See NOTE *1
LOCK MOTOR WIRE PINK/BLACK (+) @ TOP plug of FUSEBOX
DOOR TRIGGER BLACK/LIGHT BLUE (+) @ TOP plug of FUSEBOX
DOMELIGHT SUPERVISION USE DOOR TRIGGER,
TRUNK RELEASE See NOTE *2, Requires Part #775 Relay @ TRUNK RELEASE SWITCH
SLIDING POWER DOOR N/A
HORN PURPLE or BLUE (-) @ STEERING COLUMN HARNESS
TACH TAN/YELLOW (AC0 @ PCM, See NOTE *3
WAIT TO START LIGHT N/A
BRAKE RED/LIGHT GREEN (+) @ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM PINK/WHITE (-) IN DRIVERS KICK PANEL
ANTI-THEFT FORD'S SECURILOCK ANTI-THEFT TRANSPONDER SYSTEM TRANSPONDER @ IGNITION SWITCH TUMBLER
NOTES
NOTE *1 the GEM (Generic Control Module) is located to the LEFT of the STEERING COLUMN.







NOTE *2 On Vehicles with FACTORY KEYLESS ENTRY, the TRUNK Release is a (-) PURPLE/YELLOW wire at the Trunk Release Switch and on vehicle without FACTORY KEYLESS ENTRY, the Trunk Release is a (+) GRAY/RED wire at the Trunk Release Switch.





NOTE *3 the PCM (Powertrain Control Module) is located on the Passenger side firewall under the hood.





NOTE #4: This vehicle is equipped with a Special Anti-theft key, to remote start you will

need a Bypass module 791, use this module IF you have a extra ignition key to

place inside the 791 to remote start, if you do not have an extra key to use or wish

not to have a key placed inside this bypass module, we OFFER a KEYLESS INTERFACE

BYPASS MODULE that does not require a key to be placed inside the bypass module,

this is Part # PKALL or PKFM, either one will work, to order, go to the INTERFACE

BYPASS MODULE PAGE on this website.
LINK 1 LINK TEXT 1 LINK 2 LINK TEXT 2