PRINT
INFINITI G37
MODEL YEAR(S
G37 2008-2009
KEY T-HARNESS IMMOBILIZER
N/A N/A INFINITI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1
PART COLOR LOCATION DIAGRAM
12 VOLT CONSTANT WHITE (+) @ BCM, (BLACK, 3-PIN PLUG), PIN 1, NOTE #2
STARTER BROWN (-) @ PUSH-BUTTON IGNITION Switch or BCM, (BLACK, 40-PIN PLUG), PIN 18, NOTE #2
STARTER 2 LT. BLUE (-) @ BCM, (GRAY, 40-PIN PLUG), PIN 21, NOTE #2
IGNITION 1 RED (+) @ BCM, (BLACK, 40-PIN PLUG), PIN 11, NOTE #2
IGNITION 2 YELLOW (-) @ BCM, (GRAY, 40-PIN PLUG), PIN 16, NOTE #2
IGNITION 3 N/A
ACCESSORY/HEATER BLOWER 1 ORANGE (+) @ BCM, (BLACK, 40-PIN PLUG), PIN 31, NOTE #2
ACCESSORY/HEATER BLOWER 2 ORANGE (+) @ BCM, (BLACK, 40-PIN PLUG), PIN 24, NOTE #2
KEYSENSE N/A
PARKING LIGHTS ( - ) N/A
PARKING LIGHTS ( + ) RED (+) @ DASH FUSE BOX, (WHITE, 10-PIN PLUG), PIN 5
POWER LOCK NOTE #3 @ POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 4 or 6
POWER UNLOCK NOTE #4 @ POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 6 or 7
LOCK MOTOR WIRE PURPLE (5-wire type) @ BCM, (WHITE, 16-PIN PLUG), PIN 5, NOTE #2
DOOR TRIGGER NOTE #6 @ BCM, (GREEN, 40-PIN PLUG), PIN 39, NOTE #2
DOMELIGHT SUPERVISION PURPLE (-) @ BCM, (WHITE, 16-PIN PLUG), PIN 16, NOTE #2
TRUNK RELEASE GRAY (-) @ BCM, (GRAY, 40-PIN PLUG), PIN 36, NOTE #2
SLIDING POWER DOOR N/A
HORN LT. GREEN (-) @ HORN Switch, (GRAY, 8-PIN PLUG), PIN 8, under Steering Column cover
TACH RED (AC) @ PSCU, (WHITE, 12-PIN PLUG), PIN 10, NOTE #5
WAIT TO START LIGHT N/A
BRAKE BROWN (+) @ BCM, (GREEN, 40-PIN PLUG), PIN 7, NOTE #2
FACTORY ALARM DISARM Use UNLOCK wire
ANTI-THEFT INFINITI'S TRANSPONDER ANTI-THEFT SYSTEM, Requires Bypass Module, See NOTE #1
NOTES
NOTE #1: This vehicle is equipped with INFINITI'S TRANSPONDER ANTI-THEFT System that

requires a Bypass Module for Remote Starting:



Part# 791 Bypass Module (Key Required) requires an Extra Ignition Key placed inside

module for Operation FOR REMOTE STARTING ONLY!!.



Part # XK09 Bypass Module (No Key Require in Module) FOR REMOTE STARTING

ONLY!!



Part # DB-ALL Interface Bypass Module (No Key Required) this bypass is for Remote

Starting and does the door locks (keyless entry), truck release, parking lights and

Brake connection.



To order go to the INTERFACE BYPASS MODULE Page on this website.









NOTE #2: the BCM (Body Control Module) is located in the PASSENGER KICK PANEL.







NOTE #3: TEST this wire while Turning the KEY in the Drivers Door. This wire will also ARM the

FACTORY ALARM. The LOCK wire is a PURPLE (-), TYPE B, (Sedan and Convertible),

GRAY (-) TYPE B, (Coupe)





NOTE #4: TEST this wire while Turning the KEY in the Drivers Door. This wire will also DISARM the

FACTORY ALARM. The UNLOCK wire is a YELLOW (-), TYPE B, (Sedan), WHITE (-)

(Coupe and Convertible) Requires Double Pulse.







NOTE #5: the PSCU, (Power Steering Control Unit) is located under the PASSENGER DASH,

behind the GLOVE BOX.





NOTE #6: the DOOR TIGGER wire is GRAY (-), (Sedan and Convertible) and RED (-) (Coupe)
LINK 1 LINK TEXT 1 LINK 2 LINK TEXT 2