PRINT
NISSAN FRONTIER
MODEL YEAR(S
FRONTIER 2002-2003
KEY T-HARNESS IMMOBILIZER
N/A N/A N/A
PART COLOR LOCATION DIAGRAM
12 VOLT CONSTANT GREEN (+) IGNITION SWITCH HARNESS
STARTER BLACK/YELLOW (+) See NOTE *1 IGNITION SWITCH HARNESS
STARTER 2 GREEN/YELLOW (+) See NOTE *1 IGNITION SWITCH HARNESS
IGNITION 1 BLACK/WHITE (+) IGNITION SWITCH HARNESS
IGNITION 2 N/A
IGNITION 3 N/A
ACCESSORY/HEATER BLOWER 1 RED/YELLOW (+) IGNITION SWITCH HARNESS
ACCESSORY/HEATER BLOWER 2 N/A
KEYSENSE N/A
PARKING LIGHTS ( - ) N/A
PARKING LIGHTS ( + ) BLUE/RED (+) @ STEERING COLUMN HARNESS
POWER LOCK YELLOW (TYPE B) @ SMART ENTRY MODULE, See NOTE *2
POWER UNLOCK YELLOW/RED (TYPE B) @ SMART ENTRY MODULE, See NOTE *2
LOCK MOTOR WIRE BLUE (+) @ SMART ENTRY MODULE, See NOTE *2
DOOR TRIGGER RED/BLACK (-) @ SMART ENTRY MODULE, See NOTE *2
DOMELIGHT SUPERVISION USE DOOR TRIGGER, Requires Part #775 Relay
TRUNK RELEASE N/A
SLIDING POWER DOOR N/A
HORN LIGHT GREEN/RED (-) or BROWN (-) @ STEERING COLUMN HANRESS
TACH PINK/BLUE or BLACK @ INSTRUMENT CLUSTER, See NOTE *3
WAIT TO START LIGHT N/A
BRAKE BROWN/RED (+) @ SWITCH ABOVE BRAKE PEDAL
FACTORY ALARM DISARM N/A
ANTI-THEFT N/A
NOTES
NOTE *1 When Installing a REMOTE STARTER, you MUST use BOTH Starter #1 and Starter #2 wires. Both wires must be connected to the STARTER/CRANKING Output wire from the Remote Starter or the vehcile will NOT Remote Start when the Engine is cold.





NOTE *2 THE SMART ENTRY MODULE IS LOCATED TO THE RIGHT OF THE STEERING COLUMN. THESE WIRES WILL ONLY METER WHEN TURNING THE KEY IN EITHER DOOR CYLINDER.





NOTE *3 THIS WIRE IS ALSO AT THE ECM (Electronic Control Module) LOCATED BELOW THE HEATER BOX TO THE RIGHT OF THE GAS PEDAL. THE TACH WIRE IS IN THE TOP ROW, 3RD PIN LEFT OF CENTER.
LINK 1 LINK TEXT 1 LINK 2 LINK TEXT 2