NOTE *1 this vehicle uses 3 wires, the TAN (-) is for the DRIVERS DOOR, the DARK BLUE (-) is for the PASSENGERS DOOR and the LIFTGATE, the ORANGE (-) is for the SLIDING DOORS, use a 3 wires and DIODE ISOLATE, when connecting to an ALARM SYSTEM, use all (3) DOOR TRIGGER wires and DIODE ISOLATE, to connect, See DIAGRAM.
NOTE *2 the BCM (Body Control Module) is located above the PASSENGER SIDE KICK PANEL.
NOTE *3 a (-)Negative Pulse to the DARK BLUE (-) wire will open the Sliding Door, and another (-)Negative Pulse, to the same wires, will close the Sliding Door.
|