PRINT
TOYOTA 4-RUNNER
MODEL YEAR(S
4-RUNNER 2007-2009
KEY T-HARNESS IMMOBILIZER
TOYKEY- 2 N/A TOYOTA'S TRANSPONDER SYSTEM, See NOTE #1
PART COLOR LOCATION DIAGRAM
12 VOLT CONSTANT RED (+) @ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 7
STARTER GREEN/BLACK (+) @ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 8
STARTER 2 N/A
IGNITION 1 BLACK/RED (+) @ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 6
IGNITION 2 BLUE/YELLOW (+) @ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 4
IGNITION 3 N/A
ACCESSORY/HEATER BLOWER 1 WHITE/GREEN (+) @ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 3
ACCESSORY/HEATER BLOWER 2 N/A
KEYSENSE N/A
PARKING LIGHTS ( - ) GREEN (-) @ HEADLIGHT SWITCH or BODY ECU, (TOP, WHITE, 26-Pin Plug) Pin 8, NOTE #2
PARKING LIGHTS ( + ) GREEN (+) @ DASH FUSE BOX, (WHITE, 16-Pin Plug(F) Pin 13
POWER LOCK RED/WHITE to BLUE/WHITE (TYPE B), NOTE #3 in DRIVERS KICK PANEL, (WHITE, 18-Pin Plug) Pin 4
POWER UNLOCK GREEN/WHITE to BLUE/ORANGE (TYPE B), NOTE #4 in DRIVERS KICK PANEL, (WHITE, 18-Pin Plug) Pin 5
LOCK MOTOR WIRE BLACK/WHITE to BLUE/RED (5-wire type) in DRIVERS KICK PANEL, (WHITE, 13-Pin Plug) Pin 8
DOOR TRIGGER PURPLE/YELLOW (-) @ BODY ECU,(TOP, WHITE, 26-Pin Plug) Pin 12, NOTE #2
DOMELIGHT SUPERVISION WHITE (-) @ DASH FUSE BOX, (WHITE, 20-Pin Plug(A) Pin 8
TRUNK RELEASE LOCKS/UNLOCKS with Doors
SLIDING POWER DOOR N/A
HORN GREEN/RED (-) @ HORN SWITCH (BLACK, 12-Pin Plug) Pin 6
TACH BLACK/WHITE (AC) @ DATA LINK Connector, (WHITE, 16-Pin Plug) Pin 9 (V6) NOTE #5
WAIT TO START LIGHT N/A
BRAKE GREEN/YELLOW (+) @ BRAKE SWITCH or DASH FUSE BOX, (WHITE, 16-Pin Plug(F) Pin 16
FACTORY ALARM DISARM GREEN (-) (Requires double Pulse) NOTE #6 in DRIVERS KICK PANEL, (WHITE, 18-Pin Plug) Pin 8
ANTI-THEFT TOYOTA'S TRANSPONDER SYSTEM, See NOTE #1 @ IGNITION SWITCH TUMBLER
NOTES
NOTE #1: TOYOTA'S TRANSPONDER SYSTEM, Requires Bypass Module:

(For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation.

(For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for

Operation) 2-KEYS Required to Program Module.

To order please go to the SECURITY BYPASS MODULE Page or INTERFACE BYPASS

MODULE Page on this website.





NOTE #2: the BODY ECU is attached to the back of the DASH FUSE BOX, it has 3 plugs on the

Right side Edge.





NOTE #3: this wire is only needed if the Door Locks do not function with the Aftermarket System

while the vehicle is running. All other times just use the Factory Alarm Arm wire.





NOTE #4: this wire is only needed if the Door Locks do not function with the Aftermarket System

while the vehicle is running. All other times just use the Factory Alarm Disarm wire.





NOTE #5: on V-8 Models the TACH wire is in the DRIVERS KICK PANEL, (WHITE, 13-Pin Plug)

Pin 13





NOTE #6: TEST this wire while turning the Key in the Drivers Door, this wire will also Unlock the

doors.
LINK 1 LINK TEXT 1 LINK 2 LINK TEXT 2