NOTE *1 the TAN (-) is for the DRIVERS DOOR, the DARK BLUE (-) is for the PASSENGER DOOR and the LIFTGATE, and the ORANGE (-) is for the SLIDING DOORS. WHEN CONNECTING to an ALARM SYSTEM, use all (3) DOOR TRIGGER wires and DIODE ISOLATE. to connect, See DIAGRAM
NOTE *2 the BCM (Body Control Module) is located ABOVE the PASSENGER SIDE KICK PANEL.
NOTE *3 a (-) Negative pulse on this LIGHT BLUE (-) wire will slide the door open, and another (-) Negative pulse on the same wire will close the sliding door.
NOTE *4 the TACH wire is in the MAIN HARNESS on the DRIVERS SIDE of ENGINE ON TOP.
|