|
PART
|
COLOR
|
LOCATION
|
DIAGRAM
|
|
12 VOLT CONSTANT
|
BLACK (+)
|
@ DASH FUSE BOX, (WHITE, 1-Pin Plug(A) Pin 1
|
|
|
STARTER
|
BLUE (+) NOTE #2
|
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 8
|
|
|
STARTER 2
|
RED (+)
|
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 1
|
|
|
IGNITION 1
|
YELLOW (+) NOTE #3
|
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 6
|
|
|
IGNITION 2
|
GREEN (+) NOTE #4
|
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 4
|
|
|
IGNITION 3
|
N/A
|
|
|
|
ACCESSORY/HEATER BLOWER 1
|
GRAY (+) NOTE #5
|
@ IGNITION SWITCH, (WHITE, 8-Pin Plug) Pin 3
|
|
|
ACCESSORY/HEATER BLOWER 2
|
N/A
|
|
|
|
KEYSENSE
|
N/A
|
|
|
|
PARKING LIGHTS ( - )
|
BLUE (-)
|
@ HEADLIGHT SWITCH, (WHITE, 20-Pin Plug) Pin 18
|
|
|
PARKING LIGHTS ( + )
|
N/A
|
|
|
|
POWER LOCK
|
GREEN to PURPLE (TYPE B), NOTE #7
|
in DRIVERS KICK PANEL, (WHITE, 20-Pin Plug) Pin 16
|
|
|
POWER UNLOCK
|
BLUE to BROWN (TYPE B), NOTE #8
|
in DRIVERS KICK PANEL, (WHITE, 20-Pin Plug) Pin 17
|
|
|
LOCK MOTOR WIRE
|
RED to WHITE (5-wire type)
|
in DRIVERS KICK PANEL, (WHITE, 20-Pin Plug) Pin 1
|
|
|
DOOR TRIGGER
|
BLUE to PINK (-)
|
in DRIVERS KICK PANEL, (BLUE, 20-Pin Plug) Pin 3
|
|
|
DOMELIGHT SUPERVISION
|
BROWN (-
|
@ DASH FUSE BOX, (WHITE, 12-Pin Plug(R) Pin 5
|
|
|
TRUNK RELEASE
|
BLUE (-)
|
@ RELEASE SWITCH (WHITE, 6-Pin Plug) Pin 5
|
|
|
SLIDING POWER DOOR
|
N/A
|
|
|
|
HORN
|
GRAY (-)
|
@ HORN SWITCH (WHITE, 12-Pin Plug) Pin 8
|
|
|
TACH
|
BLACK to WHITE (AC)
|
LEFT of Steering Column (WHITE, 18-Pin Plug) Pin 17
|
|
|
WAIT TO START LIGHT
|
N/A
|
|
|
|
BRAKE
|
WHITE to BLUE (+)
|
@ BRAKE SWITCH or DASH FUSE BOX, (WHITE, 12-Pin Plug(P) Pin 3
|
|
|
FACTORY ALARM DISARM
|
GRAY to PURPLE (-) NOTE #9
|
in DRIVERS KICK PANEL, (WHITE, 20-Pin Plug) Pin 19
|
|
|
ANTI-THEFT
|
TOYOTA'S TRANPONDER SYSTEM, See NOTE #1
|
@ IGNITION SWITCH TUMBLER
|
|
|
NOTES
|
NOTE #1: TOYOTA'S TRANSPONDER SYSTEM, Requires Bypass Module:
(For Remote Starting Only) Part #791 Bypass, (Requires Extra Key) for Operation,
2009-2011.
(For Remote Starting Only) Part # PK-ALL Bypass. (No Extra Key Required for
Operation) 2-KEYS Required to Program Module, for Model years 2009-2010 Only!!
(For Remote Starting/Keyless Entry) Part #DBALL2, (NO Extra Key Required for
Operation) 1-Key Required for Programming, for model year 2011 and UP
To order CALL Tech Support at 800 878 8007, 9AM to 5PM eastern time, M-F
NOTES #2,3,4,5: on vehicles with SMART KEY, PUSH-BUTTON Start, THE WIRE CONNECTIONS ARE MADE TO THE DBALL2 INTERFACE MODULE NOT TO THE VEHICLE
.NOTE #6: the BODY ECU is located under the DRIVERS DASH, it is attached to the RIGHT side of
the DASH FUSE BOX.
NOTE #7: this wire is only needed if the Door Locks do not function with the Aftermarket System
while the vehicle is running. All other times just use the Factory Alarm Arm wire.
NOTE #8: this wire is only needed if the Door Locks do not function with the Aftermarket System
while the vehicle is running. All other times just use the Factory Alarm Disarm wire.
NOTE #9: TEST this wire while turning the Key in the Drivers Door, this wire will also Unlock the
doors.
|