Show Large Image
This pictures shows the connections to the LIGHT BLUE (LOCK) wire and the WHITE (UNLOCK) wire at the FACTORY KEYLESS ENTRY Module.
Show Large Image
This picture shows the IGNITION SWITCH Harness and Plug at the BOTTOM of the STEERING COLUMN. This harness has a LARGE BLACK Plug with the BOLT in the middle of the plug. When installing a T-Harness, unscrew the bolt to seperate the IGNITION SWITCH HARNES
Show Large Image
This picture show the T-HARNESS in place and bolted between the (2) IGNTION SWITCH harnesses. Note** the YELLOW AIRBAG wires and AIRBAG Plug. The AIRBAG wires ARE NOT in the IGNITION SWITCH HARNESS Plug, DO NOT try to UNPLUG the AIRBAG Harness.
Show Large Image
This picture show the FACTORY KEYLESS ENTRY Module, that has been removed from the BLACK Plastic Under Dash Panel. This panel is the first panel removed to gain access to the under side of the Drivers Dash, if the vehicle is equipped with FACTORY KEYLESS,
Show Large Image
This picture shows the location and color of the PARKING LIGHT wire at the BACK of the HEADLIGHT SWITCH. This wire will test as a (+)Positive Parking Light Circuit.
Show Large Image
This picture show the connection of the wire from the unit to the (+)Positive PARKING LIGHT wire at the BACK of the PARKING LIGHT SWITCH on the vehicles dash. To gain access, remove the screws on the dash board cover above the INSTRUMENT CLUSTER, with the
|