PRINT
NISSAN ALTIMA
MODEL YEAR(S
ALTIMA 2007-2012
KEY T-HARNESS IMMOBILIZER
N/A N/A NISSAN'S SMART KEY ANTI-THEFT SYSTEM, See NOTE #1
PART COLOR LOCATION DIAGRAM
12 VOLT CONSTANT WHITE/BLACK (+) (40AMP) @ BCM, (BLACK, 3-PIN PLUG), PIN 1, NOTE #2
STARTER BROWN (-) @ PUSH-BUTTON SWITCH or BCM, (BLACK, 40-PIN PLUG), PIN 29, NOTE #2
STARTER 2 RED (-) @ BCM, (GRAY, 40-PIN PLUG), PIN 21, NOTE #2
IGNITION 1 RED/BLACK (+) @ BCM, (BLACK, 40-PIN PLUG), PIN 11, NOTE #2
IGNITION 2 BROWN/WHITE (-) @ BCM, (GRAY, 40-PIN PLUG), PIN 16, NOTE #2
IGNITION 3 N/A
ACCESSORY/HEATER BLOWER 1 YELLOW (+) @ BCM, (BLACK, 40-PIN PLUG), PIN 31, NOTE #2
ACCESSORY/HEATER BLOWER 2 BLUE (+) @ BCM, (BLACK, 40-PIN PLUG), PIN 24, NOTE #2
KEYSENSE N/A
PARKING LIGHTS ( - ) N/A
PARKING LIGHTS ( + ) RED/BLUE (+) @ DASH FUSE BOX, (WHITE, 10-PIN PLUG), PIN 8
POWER LOCK GRAY (TYPE B), NOTE #3 in DRIVERS KICK PANEL or BCM, (GREEN, 40-PIN PLUG), PIN 17, NOTE #2
POWER UNLOCK GRAY/RED (TYPE B), NOTE #4 in DRIVERS KICK PANEL or BCM, (GREEN, 40-PIN PLUG), PIN 20, NOTE #2
LOCK MOTOR WIRE PURPLE (5-wire type) in DRIVERS KICK PANEL or BCM, (WHITE, 16-PIN PLUG), PIN 5, NOTE #2
DOOR TRIGGER LT. BLUE (-) in DRIVERS KICK PANEL or BCM, (GREEN, 40-PIN PLUG), PIN 39, NOTE #2
DOMELIGHT SUPERVISION WHITE to YELLOW (-) @ DRIVERS A PILLAR or BCM, (WHITE, 16-PIN PLUG), PIN 16, NOTE #2
TRUNK RELEASE BLUE/RED (-) @ RELEASE Switch or BCM, (GRAY, 40-PIN PLUG), PIN 36, NOTE #2
SLIDING POWER DOOR N/A
HORN BLUE/ORANGE (-) @ HORN Switch, (GRAY, 8-PIN PLUG), PIN 8
TACH PURPLE/WHITE (AC) @ ECM, (BLACK, 32-PIN PLUG), PIN 14, NOTE #5
WAIT TO START LIGHT N/A
BRAKE LT. GREEN to ORANGE/BLUE (+) @ BRAKE Switch or BCM, (GREEN, 40-PIN PLUG), PIN 7, NOTE #2
FACTORY ALARM DISARM BLUE/RED or RED (-) Requires Double Pulse, NOTE #6 @ POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 6 or 7
ANTI-THEFT NISSAN'S SMART KEY ANTI-THEFT SYSTEM, See NOTE #1
NOTES
NOTE #1: This vehicle is Equipped with NISSAN'S PROXIMITY (SMART KEY) ANTI-THEFT SYSTEM AND REQUIRES Part # DB-ALL for REMOTE START/KEYLESS Entry, requires 1 FOB for programming. To Order go to the INTERFACE BYPASS MODULE Page on this website.







NOTE #2: the BCM, (Body Control Module) is located Behind the INSTRUMENT CLUSTER.







NOTE #3: this wire is Only on vehicles with LEFT Front Only Anti-Pinch Power Window Systems.

On vehicles with LEFT and RIGHT Front ANTI-PINCH Power Window Systems, use the

FACTORY ALARM ARM wire, it is a BLUE/BLACK or BLUE (-) located at the POWER

WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 4 or 6. TEST this wire while turning

the KEY in the DRIVERS DOOR.







NOTE #4: this wire is Only on vehicles with LEFT Front Only Anti-Pinch Power Window Systems.

On vehicles with LEFT and RIGHT Front ANTI-PINCH Power Window Systems, use the

FACTORY ALARM DISARM wire, it is a BLUE/RED or RED (-) Requires a Double Pulse,

located at the POWER WINDOW Main Switch, (WHITE, 16-PIN PLUG), PIN 6 or 7. TEST

this wire while turning the KEY in the DRIVERS DOOR.







NOTE #5: the ECM, (Engine Control Module) is located in the ENGINE COMPARTMENT, next to

the BATTERY.







NOTE #6: On vehicles with LEFT Front ANTI-PINCH Power Window Systems Only, this wire is

located in the DRIVERS KICK PANEL or at the BCM, (GREEN, 40-PIN PLUG)

PIN 15, TEST this wire while turning the KEY in the DRIVERS DOOR.
LINK 1 LINK TEXT 1 LINK 2 LINK TEXT 2