DIAGNOSIS CODE TABLE


Code No.
Diagnostic item
B1709
ETACS-ECU(EEPROM)
B1710
ETACS-ECU(ROM)
B1720
Dead keyless entry transmitter battery
B1728
Abnormal voltage at ETACS-ECU power supply
B1729
B1721
Immobilizer
Base station failure
B1722
Antenna failure
B1723
Transponder communication failure
B1725
Wrong data/random number in CAN message
B1726
Too much challenges received
B1730
Key out of sync
B1731
Immobilizer communication failure
B1740
Flasher timer
Blown turn signal lamp (RH) bulb
B1741
Blown turn signal lamp (LH) bulb
B1742
Turn signal lamp switch failure
B1743
Blown hazard warning lamp fuse
B1744
Hazard warning lamp switch failure
B1750
Driver door status fail <Vehicles with deadlock system>
B1760
Variant cording not completed
B1761
VIN data not entered
U1073
CAN communication*1
Bus Off
U1100
Engine-ECU <M/T> or A-M/T-ECU*2 <Automated manual transmission> time-out (related to engine)
U1101
Engine-transmission-ECU time-out (related to automated manual transmission)
U1102
ABS or active stability control system-ECU time-out
U1108
Combination meter time-out
U1111
Multi-centre display unit (middle-grade type) time-out
U1112
SRS-ECU time-out
U1121
Failure information on A-M/T-ECU*2 (related to automated manual transmission)
U1128
Failure information on combination meter
U1500
LIN communication*1
Column switch time-out
U1504
Rain light sensor time-out
U1507
EATCS-ECU transmission error
U1550
Auto light sensor fail
U1551
Rain sensor fail
note
  • *1: As for the diagnosis codes of CAN communication and LIN communication, the codes related to the items which are not equipped will not be displayed.
  • *2: Engine automated manual transmission electronic control unit