MODULUS

CODE HOPPING TRANSMITTER SELF-LEARNING PROCEEDING ( M10 - M20 series )

The alarm is supplied with two rolling code transmitters :

• 56 bit serial transmission
• four billion random combinations
• 70 million of billions combination
• anti-scanner
• anti-grabbing
• self-learning

In case of transmitter lost, stolen or damaged MODULUS dealer can supply another one, usually from his stock.

The self-learning proceeding works as follows :

1. Alarm disarmed, ignition key ON, driver's door opened, press the existing transmitter button until the tricolour LED comes on red.
2. Release the button and wait for LED switched OFF.
3. Press the new transmitter button until LED comes on GREEN.
4. Release the button, then press again and wait for LED switched OFF.

To get the lost or stolen transmitter invalid and useless repeat five times the above self-learning proceeding ( all the 4 points as above ) by the existing transmitter.

Should you find again the lost transmitter, it will be invalid, but you can get it operational by the above self-learning proceeding.

One can memorise up to five transmitters.