| Function |
Button Operation |
Original Status |
Siren/Parking Light/ Lock Reference |
| Arm |
LEFT button |
Disarm |
1 chirp, 1 flash/lock /starter disable |
| Disarm |
LEFT button |
Arm |
2 chirps, 2 flash/unlock, starter enable |
| Silent Arm |
RIGHT button then LEFT button within 3 sec. |
Disarm |
1 flash/lock, starter disable |
| Silent Disarm |
RIGHT button then LEFT button within 3 sec. |
Arm |
2 flash/unlock, starter enable |
| Delete Shock Sensor |
LEFT button then LEFT button within 3 sec. |
Arm |
1 chirp/1 flash, shock sensor disable |
| Anti-Rob |
LEFT + RIGHT button |
any time |
5 flash/door lock starter disable |
| Panic |
LEFT button for 3 sec. |
any time |
siren/parking light for 60 sec. |
| 2nd channel Output (Trunk release) |
RIGHT button for 3sec. |
any time |
disarm, 3 flash, 2nd channel output 0.5sec. |
| Wire # |
Wire Color |
Wire Identification |
Installation |
| 1 |
Black |
Ground |
Attach to an existing ground wire or secure to a non-painted metal surface |
| 2 |
Grey |
Parking Lights |
Attach to the wire that has +12V when the headlight switch is on the parking light position |
| 3 |
Red |
Main Power |
Attached to a constant +12 volts source |
| 4 |
White |
Siren |
Connect to the Red Wire of Siren |
| 5 |
Red /White |
Key on |
Connect to a true ignition wire that is +12 volts when the ignition key is in the ON/RUN position |
| 6 |
Yellow |
Starter interrupt |
Connect to the yellow wire of external starter killer relay |
| 7 |
Brown |
Negative Door Trigger |
Tap on to the door pin switch wire if the switch is negative trigger |
| 8 |
Orange |
Positive door Trigger |
Tap on to the door pin switch wire if the switch is positive trigger |
| 9 |
Pink |
2nd Channel |
Connect to optional accessories such as trunk relaease, starter |
Please refer to the diagram as below.