SUN GUN

NS-2000

Installation Guide

STANDARD FEATURES/REMOTE OPERATION

1. ARM/DISARM

Use button 1 to arm. When arming, Central Lock is locked, Starter Kill stands-by and Parking Lights flash once, Siren chirps once. Alarm will be triggered whenever the car is hit, shaken or intruded. Press button 1 again to Disarm. When disarmed, Central Lock is unlocked, Parking Lights flash thrice, Siren chirps thrice.

2. PANIC

Hold button 1 for over 2 seconds to activate Panic Mode. Under Panic Mode, Siren keeps chirping and Parking Lights flashing until button 1 is pressed again to release Panic Mode.

3. CAR FINDER

Press button 2 then Siren chirps once and Parking Lights flash six times.

4. REMOTE TRUNK OPEN OR REMOTE ENGINE START

Press button 2 for over 2 seconds to send out negative output for Remote Trunk opening or Remote Engine Start.

5. CAR JACKING

When Ignition ON, press button 4(1 +2) for 2 seconds, then Parking Lights flash once. System will be into Car Jacking function. After 20 seconds, Siren chirps every 2 seconds once to pre-warn the user. After 10 seconds Parking Light and Siren blow, Starter Killer stand by. To release Car Jacking function, press button 4(1+2) again. Siren chirps once. Or turn Ignition ON/OFF 4 times, then press Override Switch to reset this function. Or just turn Ignition ON/OFF 8 times.

6. CHIRP DEFEAT ARM/DISARM

Press button 3 to arm and disarm the Alarm without chirping. When the Alarm is triggered, Siren chirps and Parking Lights flash as normal armed condition do. To release Chirp Defeat, press button 3 or button 1.

7. SECURITY REARM

Alarm resumes arming automatically if neither doors have not been opened or Ignition ON within 30 seconds after disarm. This feature is to avoid mis-touched or mis-disarmed.

8. IGNITION SAFETY DOOR LOCK

After Ignition has been turned on for 5 seconds, doors will be locked passively for safety reason. But if the door is opened and closed within 5 seconds, Ignition Safety Door Lock feature will be canceled to avoid being locked out. Central Lock will unlock immediately upon Engine off.

9. PROGRAMMABLE LAST DOOR ARMING (WITH DOOR LOCK)

Alarm will be arming and door will be locked 30 seconds later whenever Engine is OFF and last door has been opened and closed. This feature works only when a mini-jumper is placed on 3rd pair of pin header.

10. SMART LED

LED flashes slowly when the Alarm is in armed condition. If the door had been opened in armed condition, LED becomes quick flashing. In valet mode, LED is solid on.

11. SMART CHIRP (Door Intrusion Indication)

Had the door been opened and closed while the Alarm was armed. Siren chirps extra 6 more time, and Parking Light flash 6 times (6 more time than normal condition), when you disarm the Alarm.

12. PROGRAMMABLE FOR AIR COMPRESSOR CENTRAL LOCK

This feature works only when a mini-jumper is removed from 1st pair of Pin Header.

13. PROGRAMMABLE DOMELIGHT DELAY

Place a mini-jumper on the 2ND pair of pin headers. Then Door Sensors stand-by 5 seconds after arming. If the second pair of pin headers are open, Door Sensors delay detecting until the interior light is OFF.

14. ANTI-SCAN PROTECTION

15. PAGER INSTALLATION AVAILABILITY (OPTIONAL)

16. OVERRIDE SWITCH

In case you lost the Remote Controller, then you can turn the Ignition ON and then press Override Switch to override arming status.

17. PARKING LIGHTS RELAY BUILT-IN.

18. TWO CENTRAL LOCK RELAYS BUILT-IN.

19. ZONE BY-PASS 5 MINUTES

When Door is triggered, Siren blow for 5 minutes, then Alarm will still be in armed condition.

SPECIAL FEATURES

1. BUILT-IN CODE LEARNING FUNCTION

   MAIN UNIT HAS A BUILT-IN CODE LEARNING FUNCTION THAT 4 DIFFERENT CODES. MOST ADVANCE TECHNOLOGY IN THE WORLD.

2. COMPUTERIZED MEMORY CODE FUNCTION

   AFTER THE POWER SUPPLY IS CUT OFF, ORIGINAL REMOTE CODING WILL STILL BE KEPT IN THE MEMORY.

3. COMPUTERIZED ARMING CONDITION MEMORY

   IF POWER WAS CUT OFF WHILE ALARM IS ARMED, MAIN UNIT WILL NOT BE RESET WHEN THE MAIN POWER IS CONNECTED AGAIN. SOON AS THE MAIN POWER SUPPLY IS CONNECTED, SIREN CHIRPS, PARKING LIGHTS FLASH AND STARTER KILL IS THE CONTRARY, IF ALARM IS NOT ARMED WHILE POWER SUPPLY WAS CUT OFF, ALARM FUNCTIONS ARE OFF. ONCE MAIN POWER SUPPLY IS CONNECTED AGAIN, ALARM WILL STILL BE UNDER DISARMED CONDITION THIS IS TO AVOID TROUBLE WHEN THE CAR IS TAKEN FOR REPAIR.

4. THE CONSUMERS CAN ENCODE THEIR OWN REMOTE CODING.

   CONVENIENT AND SAFE.

ENCODE PROCESSES TO THE MAIN UNIT

1. When Disarm, turn the Key to the "ON" position.
2. Pressing the Override Switch for 5 seconds.
3. After 5 seconds, Siren chirps 5 times and LED blinks confirming the function of Code Learning.
4. Within 10 seconds, press any button of New Transmitter for sending out its code to the Main Unit.
5. Siren chirps twice, LED blinks, confirming first encoding have been successful. Within 10 seconds, press button of second transmitter Siren chirps 3 times for a successful second encode and 4 times for third encode. Siren will not chirp for the fourth encode.
   4 different codes can be processed at the same time but must be done within 10 seconds. If no button is pressed within 10 seconds, then only one code is processed. After key off or 10 seconds after last learning, it will be back to normal mode.

KEYLESS ENTRY MODE

TURN IGNITION ON, THEN PUSH OVERRIDE SWITCH ON-OFF 5 TIMES, PARKING LIGHTS FLASH 3 TIMES, LED SOLID ON. INDICATING SYSTEM IS INTO KEYLESS ENTRY MODE.

Press button 1 - Central Lock LOCK. Parking Lights flash once.

Press again - Central Lock UNLOCK. Parking Lights flash twice.

Press button 2 for over 2 seconds - Auxiliary ground output. ***

UNDER KEYLESS ENTRY, NO SIREN CHIRPS.

TO RETURN TO ALARM FUNCTIONS:

TURN IGNITION ON, THEN PUSH OVERRIDE SWITCH ON-OFF 5 TIMES, SIREN CHIRPS 3 TIMES, INDICATING SYSTEM IS BACK TO ALARM FUNCTIONS.

TRANSMITTER OPERATION MANUAL

BUTTON 1:

1. ARM - Press to activate arming status. Siren chirps once, Parking Lights flash once.
2. DISARM - Press again to disarm the system. Siren chirps thrice, Parking Lights flash thrice.
3. LOCK DOORS DURING DRIVING - During driving, press button 1 to lock the door.
4. PANIC - Keep pressing for over seconds to activate Panic Mode. Siren keeps chirping and Parking Lights flashing until button 1 is pressed again to release Panic Mode.

BUTTON 2:

1. CAR FINDER - Press once to activate Car Finder. Siren chirps once, and Parking Lights flash six times. '
2. REMOTE TRUNK OPEN OR REMOTE ENGINE START - Press for over 2 seconds to sencl momentary negative (-) output to open Trunk or Start Engine.
3. UNLOCK DOORS DURING DRIVING - During driving, press button 2 to unlock the doors.

BUTTON 3: CHIRP DEFEAT - Press to arm and disarm the system without chirping.

When Alarm is triggered, Siren chirps and Parking Lights flash as normal armed condition does.

Press button 3 or button 1 to release Chirp Defeat.

BUTTON 4 (1+2): CAR JACKING - During driving, press for 2 seconds to activate Car Jacking.

Wiring Diagramm

HOW TO CONNECT 6 WIRES POWER DOOR LOCK

Door Lock

1. Negative Trigger CAR: RED & PURPLE wire GROUND. BLUE & GRAY wire CUT OFF. GREEN wire UNLOCK (UP). WHITE wire LOCK (DOWN).
2. Positive Trigger CAR: RED & PURPLE wire to+ 12V. BLUE & GRAY wire CUT OFF. GREEN wire UNLOCK (UP). WHITE wire LOCK (DOWN).
3. Control 2 Wires Actuators: RED & PURPLE wire to+ 12V. BLUE & GRAY wires GROUND. GREEN wire UNLOCK (UP). WHITE wire LOCK (DOWN).
4. Reversal Polarity: Cut the LOCK and UNLOCK wire of Car.

Retro-side of Control Box

*** COLORED JUMPER IS USED FOR JUMPERS 1 AND 2. WHENEVER FUNCTIONS OF THESE TWO JUMPERS ARE CHANGE, POWER SUPPLY HAVE TO BE CUT OFF FIRST. OTHERWISE MEMORY OF LAST FUNCTION WILL BE RETAINED.