Drive Belt Auto-tensioner Replacement

1.	Remove the drive belt.

2.	Remove the power steering (P/S) pump without disconnecting the P/S hoses. 8 x 1.25 mm 22 N·m (2.2 kgf·m, 16 lbf·ft)

3.	Remove the idler pully assembly (EPS). 8 x 1.25 mm 22 N·m (2.2 kgf·m, 16 lbf·ft)

4.	Remove the auto-tensioner. 8 x 1.25 mm 22 N·m (2.2 kgf·m, 16 lbf·ft)

5.	Install the auto-tensioner in the reverse order of removal.