Honda Accord ESM 2003 · Service Manual Service Manual 2003

Intermediate Shaft Disassembly

Intermediate Shaft Disassembly

Special Tools Required
Oil seal driver (  07947-SB00100)

S3NYE00S947SB0T0100000D01
Half shaft base (  07NAF-SR30101)
S3NYE00SNAFSR3T0101000D01



1.Remove the set ring (A), outer seal (B), and external snap ring (C).

SDA3AEAE16236500000LCAD01BAC

2.Press the intermediate shaft (A) out of the intermediate shaft bearing (B) using a press. Be careful not to damage the metal rings (C) on the intermediate shaft during disassembly.

SDA3AEAE16236500000LCAD02PRESSBAC

3.Remove the internal snap ring.

SDA3AEAE16236500000LCAD03

4.Press the intermediate shaft bearing (A) out of the bearing support (B) using the special tools and a press.

SDA3AEAE16236500000LCAD04PRESS07947-SB0010007NAF-SR30101AB