Front Door Weatherstrip Replacement

Front Door Weatherstrip Replacement

NOTE:

• Take care not to scratch the door.
  
• Use a clip remover to remove the clips.
  

1.	At the front pillar, remove the door stop mounting bolt (A). Fastener LocationsA: Bolt, 1B: Clip, 30A 8 x 1.25 mm 29 N·m (3.0 kgf·m, 22 lbf·ft)BBBBEEFD CLIP,1DEC: Clip, 1C

2.	Detach the clips (B, C, D), then remove the door weatherstrip (E).

3.	Install the weatherstrip in the reverse order of removal and note these items: Replace any damaged clips. Make sure the weatherstrip is installed in the holder (F) securely. Apply liquid thread lock to door stop mounting bolt before installation. Check for water leaks.