Vanity Mirror Lights Test

Vanity Mirror Lights Test

1.	Open the sunvisor.

2.	Remove the sunvisor.

3.	Disconnect the 2P connector (A) from the vanity mirror light. Vanity mirror light:  2 W  CBA

4.	Check for continuity between the No. 1 and No. 2 terminals. With the vanity mirror cover (B) opened, there should be continuity. With the vanity mirror cover closed, there should be no continuity.

5.	If the continuity is not as specified, replace the bulb (C) or the sunvisor.