Sunroof Glass Replacement

Sunroof Glass Replacement

1.	Close the glass fully.

2.	Slide the sunshade all the way back.

3.	Pry out the lid (A), remove the screws (B), and release the hooks (C), then remove both bracket covers (D). With a Torx T-25 bit, remove the bolts (E) from both glass brackets (F). Fastener Locations: Screw, 2Forward5 x 0.8 mm 5 N·m (0.4 kgf·m, 3 lbf·ft)F: Bolt, 6BEBDCDC(1)AEEE

4.	Remove the glass (A) by lifting it up. Do not damage the roof panel. A

5.	Install the glass in the reverse order of the removal, and adjust the glass height alignment.

6.	Check for water leaks. Use free-flowing water from a hose without a nozzle. Do not use high-pressure water.