DTC Troubleshooting: 52-8x, 52-9x
DTC Troubleshooting: 52-8x, 52-9x
| DTC 52-8x (52-80 to 52-89, 52-8A to 52-8F), 52-9x (52-90 to 52-99, 52-9A to 52-9F): | Internal Failure of the SRS Unit |
NOTE: Before troubleshooting any of these DTCs, check the battery/system voltage. If the voltage is low, repair the charging system or replace the battery before troubleshooting the SRS. If the battery/system voltage is now OK, ask the customer if the battery ever went dead.
| 1. | Erase the DTC memory. |
| 2. | Turn the ignition switch ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off. Does the SRS indicator stay on and is DTC 52-8x or 52-9x indicated? YES - Replace the SRS unit.n NO - Intermittent failure, system is OK at this time. Go to Troubleshooting Intermittent Failures. If another DTC is indicated, go to the DTC troubleshooting index for troubleshooting details. |