Honda Accord ESM 2003 · Service Manual Service Manual 2003

M/T Mainshaft Disassembly (M/T)

M/T Mainshaft Disassembly

NOTE: 6-speed model is shown, 5-speed model is similar.

1.Remove the angular ball bearing (A) and the tapered cone ring using a commercially available bearing separator (B) and a commercially available bearing puller (C). Be sure the bearing separator is under the tapered cone ring. (5-speed model).

S6M2A1PE34150400000LCAD01CBA

2.Support 5th gear (A) on steel blocks, and press the mainshaft out of the 5th/6th synchro hub (B). Use of a jaw-type puller can damage the gear teeth.

S7A1E0DE34150400000LCAD02BA

3.Support the 3rd gear (A) on steel blocks, and press the mainshaft out of the 3rd/4th synchro hub (B). Use of a jaw-type puller can damage the gear teeth.

S7A1E0DE34150400000LCAD03BA