Honda Accord ESM 2003 · Service Manual Service Manual 2003

M/T Differential Final Driven Gear/Carrier Replacement (M/T)

M/T Differential Final Driven Gear/Carrier Replacement

1.Remove the bolts (left-hand threads) in a crisscross pattern in several steps, then remove the final driven gear (A) from the differential carrier(B).

SDA3AEAE34150727002KBAD0111 x 1.0 mm (10)
121 N·m
(12.3 kgf·m,
89 lbf·ft)AB

2.Install the final driven gear with the chamfer on the inside diameter facing the carrier. Tighten the bolts in a crisscross pattern in several steps.