Honda Accord ESM 2003 · Service Manual Service Manual 2003

Torque Converter Housing Control Shaft Oil Seal Replacement (A/T)

Torque Converter Housing Control Shaft Oil Seal Replacement

Special Tools Required
Handle driver (  07749-0010000)

S80WA00S749001T0000000D01
Oil seal driver attachment (  07947-ZV00100)
SDA3A00S947ZV0T0100000D01



1.Remove the oil seal (A) from the torque converter housing (B).

SDA3AEBE10410417258KBAD01BA

2.Install the new oil seal (A) in the torque converter housing in depth (B) of 0.5-1.5 mm (0.02-0.06 in.) below the housing surface with the special tools.

SDA3AEBE10410417258KBAD0207749-001000007947-ZV00100BA