Honda Accord ESM 2003 · Service Manual Service Manual 2003

Drive Plate Removal and Installation (A/T)

Drive Plate Removal and Installation

1.Remove the drive plate (A) and washer (B) from the engine crankshaft.

SDA3AEBE10410422251KDAD0112 x 1.0 mm
74 N·m (7.5 kgf·m, 54 lbf·ft)BA

2.Install the drive plate and washer on the engine crankshaft, and tighten the eight bolts in a crisscross pattern in two or more steps.