2nd Clutch Transmission Fluid Pressure Switch Replacement (A/T)
2nd Clutch Transmission Fluid Pressure Switch Replacement
| 1. | Remove the intake air duct. |
| 2. | Disconnect the connector from the 2nd clutch transmission fluid pressure switch (A), and remove the switch. BA20 N·m (2.0 kgf·m, 14 lbf·ft) |
| 3. | Make sure there is no water, oil, dust, or foreign particles inside the connector. |
| 4. | Install the new 2nd clutch transmission fluid pressure switch with a new sealing washer (B), and tighten the switch to the specified torque. |
| 5. | Connect the connector securely. |
| 6. | Install the intake air duct. |