VSA System Wheel Sensor Inspection (VSA)

VSA System Wheel Sensor Inspection

1.	Check the magnetic encoder (A) after cleaning the encoder. If necessary, replace the encoder. Front 0.5-1.2 mm (0.02-0.05 in.)AB Rear 0.4-1.1 mm (0.02-0.04 in.)AB

2.	Measure the air gap between the wheel sensor (B) and the magnetic encoder all the way around while rotating the encoder. Standard:    Front:  0.5-1.2 mm (0.02-0.05 in.)    Rear:  0.4-1.1 mm (0.02-0.04 in.)