Audio Unit Connector Replacement - Without Premium Audio (Without Navigation Type)

Audio Unit Connector Replacement - Without Premium Audio

When replacing an audio unit connector, match the wires to the cavities listed in the following table.

Without Navigation, Premium Audio

Cavity	Wire	Connect to	Cavity	Wire	Connect to
A1	YEL/GRN	Radio switch (AMP.)	A11	BRN	Radio remote switch ground
A2	RED	ACC (main stereo power supply)	A12	———	Not used
A3	PUR [GRN/RED]	Radio remote switch	A13	———	Not used
A4	RED [RED/BLU]	(Security input)	A14	———	Not used
A5	PNK	Right rear speaker (+)	A15	BLU/YEL	Right rear speaker (-)
A6	BLU/WHT	Left rear speaker (+)	A16	BLU/BLK	Left rear speaker (-)
A7	GRN/YEL	Front passenger's door speaker (+), Right tweeter (+)	A17	GRY	Front passenger's door speaker (-), Right tweeter (-)
A8	GRN/BLK	Driver's door speaker (+), Left tweeter (+)	A18	LT GRN	Driver's door speaker (-), Left tweeter (-)
A9	RED/BLK	Lights-on signal	A19	RED	Dash lights brightness controller
A10	WHT	Constant power	A20	BLK	Ground (G504)

[ ]:

RHD type