Rear Bumper Removal/Installation (4D)

Rear Bumper Removal/Installation

NOTE:

Have an assistant help you when removing and installing the rear bumper.
Take care not to scratch the rear bumper and body.
Put on gloves to protect your hands.

1.	Remove the rear bumper as shown.

Install the bumper in the reverse order of removal, and note these items:

Make sure the rear bumper engages the hooks of the side spacers, side brackets and upper brackets on both sides securely.
Replace any damaged clips.

Fastener Locations: Bolt, 2: Screw, 2: Screw, 4: Clip, 2ABCDACCBBDDSIDE SPACERREAR UNDER COVERUPPER BRACKETREAR BUMPERCAP6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)HOOKSCAPHOOKS
(Eight places)HOOKSCAC