Rear Inner Fender Replacement (5D)

Rear Inner Fender Replacement

NOTE: Take care not to scratch the body.

Remove the rear inner fender (A).

-1	Remove the bolt (B) from the wheel arch.
-2	On the front of the wheel arch, remove the screws (C) securing the side sill panel (D) and rear inner fender.
-3	On the rear bumper (E), remove the screws (C, F).
-4	From the wheel arch, remove the clips (G, H, I).
-5	Pull the rear inner fender out.

GGGHGFGIABEDCCCCFastener Locations: Bolt, 1B6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft): Screw, 4C: Screw, 1F: Clip, 4 or 5G: Clip, 1H: Clip, 1ILeft side only.

2.	Install the inner fender in the reverse order of removal, and note these items: Replace any damaged clips. Push the clips into place securely.