Tailgate Handle Replacement (5D)

Tailgate Handle Replacement

NOTE: Put on gloves to protect your hands.

Without Power Tailgate

1.	Remove the tailgate lower trim.

2.	Disconnect the tailgate opener cable (A) from the tailgate handle (B), and remove the nuts. AB: Nut, 2Fastner Locations6 x 1.0 mm 9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)

3.	From outside of the tailgate, pull out the tailgate handle, then remove it.

4.	Install the handle in the reverse order of removal, and note these items: Make sure the tailgate opener cable is connected securely. Make sure the tailgate opens properly.

With Power Tailgate

1.	Remove the tailgate lower trim.

2.	Disconnect the tailgate handle connector (A), and remove the nuts. ABCC: Nut, 2Fastner Locations6 x 1.0 mm 9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)

3.	From outside of the tailgate, pull out the tailgate handle (B), then remove it.

4.	Install the handle in the reverse order of removal, and note these items: Make sure the tailgate handle connector is plugged in properly. Make sure the tailgate opens properly.