Rear Seat Cargo Net Replacement (5D)

Rear Seat Cargo Net Replacement

For Some Models

NOTE:

• When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
  
• Put on gloves to protective your hands.
  

1.

Open the cover (A), pry out the caps (B, C), then remove the bolts (D) and screws (E) securing the cargo net (F) on the seat-back, and remove it. Right cargo net: Fastener Locations: Bolt, 4D6 x 1.0 mm 9.8 N·m (1.0 kgf·m, 7.2 lbf·ft): Screw, 3EABCDEBDEEDD Left cargo net: Fastener Locations: Bolt, 4D6 x 1.0 mm 9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)ABCDEBDDE: Screw, 2ED

2.	Install the cargo net in the reverse order of removal.