Exterior Parts Removal/Installation

NOTE: To adjust the alignment of the hood, the doors, and the trunk lid.

HOODREAR BULKHEAD
GUSSETTRUNK LID
HINGETRUNK LID8 x 1.25 mmREAR BUMPER
BEAM6 x 1.0 mm6 x 1.0 mm*6 x 1.0 mmREAR BUMPER
SIDE BRACKET6 x 1.0 mmFUEL FILL DOORREAR DOOR
UPPER HINGEREAR DOORREAR DOOR
LOWER HINGE8 x 1.25 mmFRONT DOOR*8 x 1.25 mmFRONT DOOR
LOWER HINGEFRONT DOOR
UPPER HINGE*8 x 1.25 mm*6 x 1.0 mm8 x 1.25 mmFRONT FENDER*6 x 1.0 mmFRONT BUMPER
BEAM8 x 1.25 mm8 x 1.25 mm*6 x 1.0 mm6 x 1.0 mmCORNER UPPER
BEAM8 x 1.25 mm*6 x 1.0 mmHOOD
HINGETOWER BAR8 x 1.25 mm8 x 1.25 mmBATTERY
BASEMounting bolts/nuts torque:6 x 1.0 mm: 9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)6 x 1.0 mm: 18 N·m (1.8 kgf·m, 13 lbf·ft)*8 x 1.25 mm: 22 N·m (2.2 kgf·m, 16 lbf·ft)8 x 1.25 mm: 29 N·m (3.0 kgf·m, 22 lbf·ft)*