Symbols (5D)

Symbols

Replacement

The symbols in the mass production body welding diagrams and in the removal/installation carry the following meanings.

Mass Production Body Welding Diagram:

: Spot welding: MIG welding: 2-Plate welding: 3-Plate welding: 4-Plate weldingP = Spot welding pitchL = MIG welding lengthUnit: mm (in.)( ): The number of welds(5)
L = 10 (0.4)(15)4-Plate welding(19)
P = 30 (1.2)

Removal/Installation:

NOTE:

The welding symbols in the illustrations don't show exact welding locations.
For exact welding locations, refer to the mass production body welding diagrams.

: Spot welding: MIG plug welding: MIG butt or fillet weldingFillet weldingMIG Plug weldingSpot weldingButt welding

Body Dimensional Drawings

Measuring dimensions show the distance between the forward or upper edge of positioning bosses and/or holes show in the detail sketches.

ForwardForwardForwardBlack DotDetail
SketchBlack dots: Measuring pointCF

NOTE: Frame repair chart measuring point is center of the hole.

Rust Prevention

The sketch shown the areas to which sealer is to be applied.

: Sealing locationsWHEELHOUSE
UPPER
EXTENSIONDAMPER
HOUSINGDetail
Sketch