Rear Panel Removal (5D)
Rear Panel Removal
- Cut and remove the rear panel.
NOTE: When removing the rear panel, leave the rear panel cross-member attached to the rear floor.
- Check the rear panel cross-member position, and check for damage, If necessary replace it.
NOTE: When removing the rear panel cross-member, leave the rear pillar lower stiffener attached to the body side.
REAR INNER LOWER PILLARREAR FLOOR ENDCROSS-MEMBER EXTENSIONREAR PANEL
CROSS-MEMBERREAR
FLOORREAR PILLAR
GUTTERMOUNTING BOLTREAR PILLAR
LOWER STIFFENERREAR PANEL
CROSS-MEMBERBUMPER BEAM
BRACKETREAR PANELREAR FLOOR END
CROSS-MEMBER EXTENSIONREAR FRAME
END FLANGEREAR PANEL CROSS-MEMBERForward