M/T Differential Final Driven Gear/Carrier Replacement (5MT)

M/T Differential Final Driven Gear/Carrier Replacement

1.	Remove the bolts (left-hand threads) in a crisscross pattern in several steps, then remove the final driven gear from the differential carrier.   10 x 1.0 mm (10) 101 N·m (10.3 kgf·m, 74.5 lbf·ft)

2.	Install the final driven gear with the chamfer on the inside diameter facing the carrier. Tighten the bolts in a crisscross pattern in several steps.