Honda Jazz/Fit 2002 · Service Manual

CVT Flywheel Housing Input Shaft Oil Seal Replacement (CVT)

CVT Flywheel Housing Input Shaft Oil Seal Replacement

Special Tools Required
Handle driver (  07749-0010000)
 

S80WA00S749001T0000000D01
Driver attachment, 37 x 40 mm (  07746-0010200)
 
S2AYA00S746001T0200000D01



1.Remove the main valve body from the flywheel housing.

2.Remove the old oil seal from the flywheel housing.

 

SAA2J15E15117934631KBJD01

3.Install the new oil seal flush with the flywheel housing. It is allowed to install the oil seal plus or minus 0.5 mm (0.02 in.) from level.

 

SAA2E02E15117934631KBAD01±0.5 mm
(±0.02 in.)07746-001020007749-0010000