Ignition Coil Removal/Installation (L12A/L13A)
Ignition Coil Removal/Installation
| 1. | When removing the front ignition coils, remove the intake manifold cover.
 6 x 1.0 mm9.8 N·m (1.0 kgf·m, 7.2 lbf·ft) |
| 2. | When removing the rear ignition coils, remove the harness holder from the brackets.
 |
| 3. | Disconnect the ignition coil connector, then remove the front ignition coils (A) and rear ignition coils (B).
 6 x 1.0 mm9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)6 x 1.0 mm 9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)BA |
| 4. | Install the ignition coils in the reverse order of removal. |