Power Mirror Switch Test/Replacement
Power Mirror Switch Test/Replacement
| 1. | Remove the driver's side dashboard side cover. |
| 2. | Push the power mirror switch (A) out from the dashboard.
 AB |
| 3. | Disconnect the 13P connector (B) from the switch. |
| 4. | Check for continuity between the terminals in each switch position according to the table. Mirror Switch:  TerminalPositionUPDOWNLEFTRIGHTLUPDOWNLEFTRIGHTR25610111213Defogger Switch:  TerminalPositionONOFF18Retract Switch:  TerminalPositionRETRACTEXTEND287 |
| 5. | If the continuity is not as specified, replace the switch. |