CVT Differential Disassembly, Inspection and Reassembly (CVT)

CVT Differential Disassembly, Inspection and Reassembly

1.	Check the final driven gear for wear and damage.   SET RING, 80 mm Selection, 10 x 1.0 mm 98 N·m (10.0 kgf·m, 72.3 lbf·ft) Left-hand threadsFINAL DRIVEN GEAR Replacement, CARRIER BEARING Replacement, DIFFERENTIAL CARRIER Backlash Inspection, Replacement, CARRIER BEARING Replacement,

2.	Check the differential carrier for wear and damage.

3.	Check the bearings for rough movement.