Sunroof Limit Switch Test

Sunroof Limit Switch Test

OPEN/CLOSE, TILT/CLOSE SWITCH:

1.	Remove the headliner

2.	Disconnect the 4P connector from the sunroof limit switch.   Terminal side of male terminals

3.	Check for continuity between the terminals in each switch position according to the table. NOTE: Turn the motor by hand with the wrench.   TerminalPositionTILT2341OPENCLOSE

OPEN SWITCH (KK, KU and KT models):

1.	Remove the headliner.

2.	Disconnect the 4P connector from the sunroof limit switch.   Terminal side of male terminalsAB

3.	Check for continuity between the terminals in each switch position according to the table. NOTE: Turn the motor by hand with the wrench.   TerminalPosition12From one stop position to fully closed positionFrom Fully opened position to one stop position