Inhibitor Solenoid Replacement (CVT)
Inhibitor Solenoid Replacement
| 1. | Disconnect the inhibitor solenoid connector, and remove the inhibitor solenoid.
 6 x 1.0 mm12 N·m (1.2 kgf·m, 8.7 lbf·ft)BA |
| 2. | Install the new inhibitor solenoid (A) with the new O-rings (B). When installing the solenoid, do not allow dust or other foreign particles to enter the transmission. |
| 3. | Check the connector for rust, dirt, or oil, then connect the connector securely. |