CKP Sensor Replacement (Without ETCS)
CKP Sensor Replacement
| 1. | Disconnect the CKP 3P connector. |
| 2. | Remove the CKP sensor (A).
 AB12 N·m (1.2 kgf·m, 8.7 lbf·ft) |
| 3. | Install the part in the reverse order of removal with a new O-ring (B). |
| 1. | Disconnect the CKP 3P connector. |
| 2. | Remove the CKP sensor (A).
AB12 N·m (1.2 kgf·m, 8.7 lbf·ft) |
| 3. | Install the part in the reverse order of removal with a new O-ring (B). |