Power Mirror Actuator Test
Power Mirror Actuator Test
| 1. | Remove the door panel. |
| 2. | Disconnect the 6P *1 (or 3P *2) connector (A) from the power mirror actuator
 *1: Power mirror with defoggerRetractable power mirror*2: Power mirror only*2:*1:AWire side offemale terminalsWire side of female terminals |
| 3. | Check actuator operation by connecting power and ground according to the table.
 TerminalPosition5 [2]6 [3]TILT UPTILT DOWNSWING LEFTSWING RIGHT[ ]: 3P connector4 [1] |
| 4. | If the mirror fails to work properly, replace the mirror actuator. |
Defogger Test:
| 5. | Check for continuity between the No. 1 and No. 2 terminals of the 6P connector. There should be continuity. |
Retract Switch:
| 6. | Check actuator operation by connecting battery power and ground according to the table.
 TerminalPosition1 [2]2 [1]Mirrors retractsfrom extend position.Mirrors extends from retract position.[ ] : Right power mirror |
| 7. | If the retract actuator fails to work properly, replace the mirror. |