Glove Box Lid Removal/Installation

Glove Box Lid Removal/Installation

NOTE:

• Take care not to scratch the dashboard and related parts.
  
• LHD is shown, RHD is symmetrical.
  

1.	Close the glove box lid (A), then remove the bolts.   : Bolt, 2Fastener LocationsA5 x 0.8 mm 5 N·m (0.5 kgf·m, 4 lbf·ft)

2.	Remove the glove box lid (A).   BA

3.	Install the lid in the reverse order of removal. Make sure each glove box stopper rubber (B) is not damaged or turned. If necessary, replace it.