Sunroof Glass Height Adjustment

The roof panel (A) should be even with the glass weatherstrip (B), to within 2+0.5/-1 mm (0.08+0.02/-0.04 in.) all the way around. If not, make the following adjustment:

2 + 0.5/-1 mm
(0.08 + 0.02/-0.04 in.)BA

1.	Remove the bracket cover from each side.

Loosen the nuts (A), and install the shims (B) between the glass frame (C) and glass bracket (D) on each side.

Shim thickness:

Front and rear max. 2 mm (0.08 in.)

DBCA
6 x 1.0 mm
9 N·m (0.9 kgf·m, 7 lbf·ft)BForward

3.	If necessary, repeat on the opposite side.