M/T Countershaft Disassembly (5MT)

M/T Countershaft Disassembly

1.	Securely clamp the countershaft assembly in a bench vise with wood blocks.   AB

2.	Use a chisel (A) to raise the locknut tab (B) from the groove in the countershaft.

3.	Remove the locknut (left-hand threads) (A) and the spring washer (B).   BA

4.	Support 5th gear (A) on steel blocks (B), then use a press (C) and an attachment (D) to press the countershaft (E) out of the ball bearing (F).   EACDFB

5.	Support 4th gear (A) on steel blocks (B), then use a press (C) and an attachment (D) to press the countershaft (E) out of the 4th gear.   CDEBA

6.	Support 3rd gear (A) on steel blocks (B), then use a press (C) and an attachment (D) to press the countershaft (E) out of the 3rd gear.   BCDEA