DTC Troubleshooting: 51 (Without VSA)
DTC Troubleshooting: 51
| DTC 51: | Motor Lock |
| 1. | Check the No. 4 (40A) fuse in the under-hood fuse/relay box, and reinstall the fuse if it is OK. Is the fuse OK? YES - Go to 2. NO - Replace the fuse, and recheck.n |
| 2. | Disconnect the ABS control unit 25P connector. |
| 3. | Measure the voltage between the ABS control unit 25P connector terminal No. 25 and body ground.
 Wire side of female terminalsABS CONTROL UNIT 25P CONNECTORMR+B (WHT/RED)Is there battery voltage? YES - Go to 4. NO - Repair open in the wire between the No. 4 (40A) fuse and the ABS control unit.n |
| 4. | Connect the ABS control unit 25P connector. |
| 5. | Clear the DTC. |
| 6. | Test-drive the vehicle at 6 mph (10 km/h) or more. Does the ABS indicator come on, and is DTC 51 indicated? YES - Replace the ABS modulator-control unit.n NO - The system is OK at this time.n |