Knock Sensor Replacement (With ETCS)
Knock Sensor Replacement
| 1. | Remove the intake manifold. |
| 2. | Disconnect the knock sensor 2P connector (A).
 BA |
| 3. | Remove the knock sensor (B). |
| 4. | Install the part in the reverse order of removal. |
| 1. | Remove the intake manifold. |
| 2. | Disconnect the knock sensor 2P connector (A).
BA |
| 3. | Remove the knock sensor (B). |
| 4. | Install the part in the reverse order of removal. |