IMA Replacement (Without ETCS)
IMA Replacement
| 1. | Disconnect the IMA sensor 3P connector (A).
 ABC |
| 2. | Remove the screw (B). |
| 3. | Remove the IMA (C). |
| 4. | Install the IMA in the reverse order of removal. |
| 1. | Disconnect the IMA sensor 3P connector (A).
ABC |
| 2. | Remove the screw (B). |
| 3. | Remove the IMA (C). |
| 4. | Install the IMA in the reverse order of removal. |