Immobilizer Control Unit-Receiver Replacement (KH)

Immobilizer Control Unit-Receiver Replacement

1.	Remove the dashboard lower cover.

2.	Remove the steering column covers.

3.	Disconnect the connectors (A) from the immobilizer control unit-receiver (B).   BAC

4.	Remove the two screws and the immobilizer control unit-receiver from the ignition key cylinder (C).

5.	Install the immobilizer control unit-receiver in the reverse order of removal.

6.	After replacement, register the immobilizer control unit-receiver with HDS, then check the immobilizer system.