Emblem Replacement - Supplement (L15A)

Emblem Replacement - Supplement

For Some Models

NOTE: When removing the emblem, take care not to scratch the body.

1.	Clean the body surface with a sponge dampened in alcohol. After cleaning, keep oil, grease, and water from getting on the surface.

2.	Apply the emblem, where shown.   REAR VTEC EMBLEMREAR Jazz EMBLEMUnit: mm (in.) Adhesive tape: Thickness 0.8 mm (0.03 in.)Body lineREAR VTEC EMBLEM64.5 (2.54)65 (2.6)58 (2.3)ADHESIVE TAPEEdge of the tailgate